Hotline: +86 0572-5667066
NEWS
NEWS
CURRENT POSITION: HOME > NEWS
Introduction to the Basic Knowledge of Centrifugal Compressors
2026-06-11 19:12


CHLORINE TURBO COMPRESSOR


Centrifugal compressor is a pressure-generating machine, belonging to turbo compressors. The word "turbo" originates from "TURBINE", which refers to rotating impellers. Centrifugal compressors are widely adopted in full low-pressure air separation units, such as CHLORINE TURBO COMPRESSOR, hydrogen chloride turbo compressors, etc. There is an obvious trend that centrifugal compressors are gradually replacing piston compressors.

Working Principle:

The bladed impeller rotates on the compressor shaft. Gas entering the impeller is driven to rotate by blades, gaining kinetic energy (velocity) and static pressure head. Then gas flows out of the impeller into the diffuser, where velocity is converted into pressure for further pressurization. Compressed gas passes through bends and return channels to the next-stage impeller, and is compressed step by step until reaching the required pressure.    For analogy: One prime mover (motor) drives a single shaft fitted with 4 impellers, similar to four electric fans on one shaft. Wind from the first fan is boosted by the second, third and fourth in sequence, delivering strong airflow in the end. Centrifugal compressors raise gas pressure through impellers in this way.

Two factors account for pressure rise inside impellers:    1. Gas rotates at high speed under blade drive, and centrifugal force generated by rotation elevates gas pressure;    2. Impellers expand radially outward, forming diffusing flow passages that boost gas pressure during flow.

As a type of dynamic velocity compressor, centrifugal compressors have distinct advantages and disadvantages compared with other compressor types:

Advantages:

1. Large, stable discharge volume with pulse-free airflow;

2. High rotating speed;

3. No internal lubrication required;

4. Excellent sealing performance with minimal leakage;

5. Flat performance curve and wide operating range;

6. Easy to realize automatic control and large-scale capacity design;

7. Few wearing parts, low maintenance workload and long operation cycle;

Disadvantages:

1. Poor operational adaptability; gas properties greatly affect performance, with large load fluctuation during startup, shutdown and normal operation;

2. High airflow velocity leads to severe friction loss on flow path components;

3. Prone to surging, which causes severe damage to the unit;

Centrifugal compressors are suitable for medium & large flow and medium-low pressure working conditions.


  • Contact
    + 86 135 8826 8698
  • WeChat
  • WeChat
  • Email
  • Top