Hotline: +86 0572-5667066
NEWS
NEWS
CURRENT POSITION: HOME > NEWS
The measures taken for handling the faults of the packing seal in industrial pumps
2026-06-11 19:13

  INDUSTRIAL PUMP Many unexpected yet inevitable faults may occur during sealing work, among which packing seal failure is quite typical. What countermeasures should we take to resolve such faults when they happen?

  We need to confirm several key performance requirements when selecting packing materials:

  1. Sufficient plasticity under gland pressure. It shall generate proper radial force under compression to closely fit the shaft and fill all pores and gaps to block leakage.

  2. Excellent chemical stability. It shall not contaminate the medium, resist swelling by medium, prevent impregnants from dissolving, and withstand corrosion from sealed liquid, gas and lubricants.

  3. Proper resilience, outstanding wear resistance and low friction coefficient to avoid destructive friction and heat generation.

  4. Adequate floating elasticity to adapt to minor shaft deflection; easy fabrication and convenient installation.

INDUSTRIAL PUMP

  After selecting packing, proceed with installation steps. Thoroughly clean the stuffing box to remove all impurities and dirt. Check dimensions of stuffing box and packing, cut packing rings according to pump shaft size with proper length. Never puncture or press packing with sharp tools such as screwdrivers or iron wires, which will create cavities and weaken sealing performance. Keep the gland perpendicular during compaction to avoid over-tightening partial packing; apply even force during fastening. Do not over-tighten packing after installation, leave appropriate loose clearance.

  Apart from packing seal faults, mechanical seal failures of industrial pumps may also occur. We will not elaborate on mechanical seal troubleshooting here. Please contact Hangzhou Zhenxing Industrial Pump Manufacturing Co., Ltd. for detailed technical support.


  • Contact
    + 86 135 8826 8698
  • WeChat
  • WeChat
  • Email
  • Top