Contact
Slurry pumps often fail to deliver liquid. Experienced operators are aware there are multiple root causes. Below, SLURRY PUMP MANUFACTURER briefly explains the common issues:
1. Faulty pump valves that cannot open normally stop liquid discharge;
2. Blocked pipelines will definitely cause no output from the slurry pump;
3. Excessive suction lift beyond rated requirements leads to loss of delivery capacity;

4. The pump casing or suction pipeline is not fully filled with liquid, contains trapped air, or draws in massive air during operation;
5. Partial blockage of the suction pipe or insufficient opening of the suction valve;
6. Insufficient liquid level depth above the suction pipe causes cavitation and intermittent fluid flow;
7. Severe air leakage at the packing seal also results in zero liquid output of the slurry pump.
Besides, it should be noted that the causes for no water output, violent discharge fluctuation, and sharp oscillation of pressure gauge, vacuum gauge and ammeter are highly similar. Troubleshooting according to these points can easily resolve the malfunction.




