Hotline: +86 0572-5667066
Products Center
Current Position: Home > Products Center
IS-type centrifugal pump
  • 1. Overview 1. Model IS pump is single-stage single-suction (axial suction) centrifugal pump. It is suitable for industrial urban water supply and drainage, as well as farmland irrigation and drainage. It conveys clean water or other liquids with physical
Product Introduction

1. Overview

1. Model IS pump is single-stage single-suction (axial suction) centrifugal pump. It is suitable for industrial & urban water supply and drainage, as well as farmland irrigation and drainage. It conveys clean water or other liquids with physical and chemical properties similar to clean water at temperature not exceeding 80℃.

2. Performance range of IS pump series (based on design point):

Rotating speed: 2900r/min and 1450r/min

Inlet diameter: 50 ~ 200mm

Flow rate: 6.3 ~ 400m³/h

Head: 5 ~ 125m

3. Pump model marking (e.g. IS80-65-160):

BaiduHi_2016-6-24_9-50-25.png

4. Pump selection guidelines for users:

(1) The flow rate of selected pump shall be lower than normal water output of wells or other water sources, with allowance for dry seasons.

(2) The selected pump head shall cover actual required lift plus pipeline friction loss.

(3) Check pump installation height, i.e. vertical distance from liquid surface to pump shaft centerline, which must be less than the allowable installation height of the pump:

Estimation formula for allowable installation height Hsz:


Hsz≤Ha-Hv-△Hs-〔NPSH〕a

Hsz≤10.09-△Hs-〔NPSH〕a

Where: Ha=10.33(m) standard atmospheric pressure (water column)

Hv=0.24(m) vapor pressure of clean water at normal temperature (20℃, water column)

△Hs=suction pipeline loss, calculated according to actual site conditions

〔NPSH〕a=〔NPSH〕r+0.3(m)

〔NPSH〕a: allowable net positive suction head; 〔NPSH〕r: required net positive suction head given in performance table

2. Performance Parameters

1. IS pump series model spectrum:

Image1.png

selection-1.jpg

selection-2.jpg

selection-3.jpg

selection-4.jpg

selection-5.jpg



  • Contact
    + 86 135 8826 8698
  • WeChat
  • WeChat
  • Email
  • Top