Contact
- 1. Overview 1. Model ISR pump is a single-stage single-suction (axial suction) centrifugal pump. It is applicable for industrial and urban water supply drainage, and delivers clean water or other liquids with physical and chemical properties similar to cl
1. Overview
1. Model ISR pump is a single-stage single-suction (axial suction) centrifugal pump. It is applicable for industrial and urban water supply & drainage, and delivers clean water or other liquids with physical and chemical properties similar to clean water at temperature no higher than 150℃.
2. Performance range of ISR pump series (based on design point):
Rotating speed: 2900r/min and 1450r/min
Inlet diameter: 50 ~ 200mm
Flow rate: 6.3 ~ 400m³/h
Head: 5 ~ 125m
3. Pump model marking (e.g. ISR80-65-160):

4. Pump selection notes for users:
(1) The flow rate of selected pump shall be lower than the normal water output of wells or other water sources, with consideration for dry seasons.
(2) The selected pump head shall cover actual required lift plus pipeline friction loss.
(3) Check pump installation height, namely vertical distance from liquid surface to pump shaft centerline, which must be less than the allowable installation height of the pump:
Estimation formula for allowable installation height Hsz:
Hsz≤Ha-Hv-△Hs-〔NPSH〕a
Hsz≤10.09-△Hs-〔NPSH〕a
Where: Ha=10.33(m) standard atmospheric pressure (water column)
Hv=0.24(m) vapor pressure of clean water at normal temperature (20℃, water column)
△Hs=suction pipeline loss, calculated according to actual conditions
〔NPSH〕a=〔NPSH〕r+0.3(m)
〔NPSH〕a: allowable net positive suction head; 〔NPSH〕r: required net positive suction head given in performance table
2. Performance Parameters
1. ISR pump series model spectrum:






- Previous: CJ coarse pulp pump
- Next: CP-type centrifugal pump




