Hotline: +86 0572-5667066
NEWS
NEWS
CURRENT POSITION: HOME > NEWS
The overall structure composition of the centrifugal compressor and its compression working principle
2026-06-11 19:18

Centrifugal compressors boost gas pressure via centrifugal force generated by high-speed impellers. They are widely applied for gas supply in chemical, air separation and smelting industries. The complete unit consists of four major supporting systems: main unit, lubrication, cooling and anti-surge systems.

1. Main Structural Components

1. Stator Assembly: Composed of inlet chamber, diffuser, volute and partition plates, responsible for flow guiding, pressure diffusion and collecting compressed gas.

2. Rotor Assembly: Main shaft, impellers, balance drum, thrust disc and coupling. High-speed rotating impellers act as the core power parts for energy conversion.

3. Bearing Assembly: Radial support bearings plus thrust bearings, bearing rotor weight and axial thrust force.

4. Auxiliary Systems: Lubricating oil station, water cooling system, sealing device, anti-surge recirculation pipeline and driving motor.

2. Gas Compression Principle

Gas flows into the impeller from the inlet; high-speed rotating blades accelerate the gas and greatly increase its kinetic energy. High-speed airflow then enters the diffuser with enlarged flow area, flow velocity drops and kinetic energy converts into pressure energy for pressure rise. Multi-stage impellers compress gas repeatedly step by step to lift pressure gradually, and the compressed gas is finally collected and discharged out of the unit through the volute.

3. Key Operation Instructions

Surge tends to occur under low flow conditions. The anti-surge valve provides recirculation make-up gas to ensure stable and continuous operation of the compressor.

  • Contact
    + 86 135 8826 8698
  • WeChat
  • WeChat
  • Email
  • Top