Contact
As the core power equipment of industrial vacuum systems, turbo vacuum pumps are prone to wear, scaling, oil circuit abnormalities and other faults during long-term continuous operation. Implementing standardized daily maintenance and regular inspection is the key to ensuring stable equipment operation, extending service life and reducing shutdown failures.
Daily inspection starts with overall appearance check. Check the unit for oil leakage, water leakage and air leakage, confirm that the foundation bolts are firmly fastened, and verify that all pipeline flanges and valve joints are well sealed without vibration displacement or abnormal leakage.
Focus on the operating status of the lubrication system. Check whether the oil level stays within the standard scale range, observe oil conditions for blackening, emulsification and impurity precipitation, keep oil temperature and pressure within the rated working range, and replenish special lubricating oil of the same model on schedule.
Inspect the cooling system regularly, check the flow rate and temperature of cooling water at inlet and outlet, and remove scale and blockages inside cooling pipelines. Ensure smooth heat dissipation and prevent excessive temperature rise, equipment overload and efficiency reduction caused by poor heat dissipation.
Monitor operating sound during equipment operation to distinguish normal operating noise from abnormal noise. In case of impact sound, friction sound or abnormal vibration, stop the machine for troubleshooting in time to check wear and looseness of impellers, bearings and transmission parts.
Strictly monitor operational process parameters, regularly record vacuum degree, operating current, motor temperature, inlet and outlet pressure, and other data. Compare with standard values, adjust working conditions timely in case of parameter deviation, and predict potential equipment hazards in advance.
Maintain air intake filtration and internal cleanliness. Disassemble and clean the air intake filter regularly to remove dust and impurities on the filter screen, prevent particulate matter from entering the pump body and wearing the impeller, reduce internal dust and oil accumulation, and ensure unobstructed airflow.
Motor maintenance cannot be ignored. Check the tightness of motor wiring terminals, clean dust and debris on the motor surface, inspect the heat dissipation condition of the cooling fan, control the motor operating temperature rise, and avoid electrical faults caused by aging circuits and poor contact.
Formulate a periodic maintenance plan. Replace aging seals, wearable bearings and other accessories on schedule, regularly remove scale from impellers and pump cavities, calibrate operating clearances, and restore the rated pumping efficiency and working performance of the equipment.
Standardize the startup and shutdown operation procedures. Frequent startup and shutdown under load is prohibited. Release system pressure after shutdown. For long-term shutdown, conduct internal moisture-proof and rust-proof protection, and keep detailed records of equipment operation, maintenance and inspection.
Strictly implement inspection and maintenance specifications for turbo vacuum pumps. Comprehensive implementation from daily inspection to regular maintenance can reduce sudden shutdown accidents, effectively lower energy consumption and maintenance costs, and ensure long-term stable and efficient operation of the vacuum system.




